When you don’t have the DAQ hardware you need…

Any version of NI-DAQ and the Measurement and Automation Explorer (MAX) released recently has provisions for “simulated” devices.  You choose which devices you want, and then NI-DAQ will pretend those devices are actually installed on your system, any calls to DAQ functions concerning that device will succeed (or fail) just as if a real device was installed.

This lets you simulate a client’s setup without having their hardware shipped to you and do most (if not all) of the programming on your own terms without being at their site.  The data produced is, of course, simulated data.  For an analog input channel it’s a sine wave, for a digital port, it’s a counting pattern.  It’s enough for you to tell if your software is working correctly with NI-DAQ.

With their hardware simulated on your machine, you can handle the basic communication part to get data in and out. Then you can install conditional-compilation pieces to substitute data more realistic for your particular situation if you need to.

You can be reasonably confident that the DAQ part of a program you develop this way will work on the real hardware, the same as it did on your simulated hardware.  Of course, for any extreme cases (high sample rate, high channel count), the simulation will be less exact, but it’s a useful feature to develop faster with fewer headaches.